Description
Introduction:
The rectifier is a device to change high voltage A.C to low voltage D.C used for different industrial application rectifier are available in the range varying from 1 Volt to 1000 Volt D.C with current output varying from 10 Amp to 20000 Amp which is suitable for both H.T & L.T Supply.
BHARTI’S rectifier equipment is wound with electrolytic Prime grade copper strip to minimize power losses, in comparison to Aluminum conductor used by many other manufacturers. Our equipment is designed liberally as per capacity and is Ideally suitable for marginal overloading conditions.
We use vertical rolling contact type voltage regulator wounds with heavy sections of copper strips suitable for 100% continuous duty cycle or industrial applications, in comparison to conventional wire-wound regulators used by other manufacturers. The carbon rollers move on both sides of the winding.
It is used for :
- Electro Plating
- Anodizing
- Hydrogenation
- Cleansing
- Electro-Chemical Processes
Salient Features:
- Asthetic Design
- Minimum Power Losses
- Less Power Consumption
- Low maintenance
- Trouble-free operation
- Long Life
Advantage of Roller Type Regulator then Conventional Regulator
| Roller | Conventional |
|---|---|
| No waveform distortion at any load | Waveform distortion |
| High power factors of more than 0.95 is achieved | Power Factor is low between 0.5-0.9 |
| The system is simple & can be easily repaired | The system is specialized & need specially trained experts for repairing. |
| Overall losses are less | Overall losses are higher |
| The copper section for a particular current is 3 times higher in roller regulators than in conventional | Copper section for particular current is 1/3 than roller regulator type rectifier. |
Reviews
There are no reviews yet.